Verger flail mulchers are Super Heavy Duty Mowers designed with heavy cutting blades that can chop heavy brush including grasses, debris, sticks, vines, branches, and other wooded materials up to 4” in diameter. The mower head is attached to a hydraulic arm allowing you to swing the mulcher beyond your tractors wheels. The head may be pivoted hydraulically up to 90 degrees for hedge or hillside work or down 55 degrees for ditch or bank work. Connect it to our optional 4-way hydraulic control valve with a hydraulic float and the mulcher will follow the contours of the terrain.A flail mower doesn’t throw grass, instead it cuts finely and leaves the cuttings on the ground where it was cut making it an excellent choice for those places where you could cause damage by throwing debris. Highway mowing and park maintenance often use flail mowers because they are less likely to throw objects during cutting.


Uses:
The verger flail mulchers are Super Heavy Duty Mowers designed with heavy cutting blades that can chop heavy brush including grasses, debris, sticks, vines, branches, and other wooded materials up to 4” in diameter.
The mower head is attached to a hydraulic arm allowing you to swing the mulcher beyond your tractors wheels. The head may be pivoted hydraulically up to 90 degrees for hedge or hillside work or down 55 degrees for ditch or bank work. Connect it to our optional 4-way hydraulic control valve with a hydraulic float and the mulcher will follow the contours of the terrain.A flail mower doesn’t throw grass, instead it cuts finely and leaves the cuttings on the ground where it was cut making it an excellent choice for those places where you could cause damage by throwing debris. Highway mowing and park maintenance often use flail mowers because they are less likely to throw objects during cutting.

Feature
For Tractors 45 – 85 HFor Tractors 45 – 85 HP
5” Diameter Rotor Shaft
Multiple Drive Belts Assure Power to the Blades
Under Deck Clump Busters
Standard 3-Pt Category II Hitch Mount Only
Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
Adjustable Finished Cutting Height (both Rear Roller & Skids)
Balanced Rotor and Shaft to Reduce Vibration & Reduce Bearing Wear
Powder Coat Paint Finish