Heavy Duty Flail Mower DP models

Uses:

The “D” series flail mulchers are super heavy duty mowers designed for large areas, with heavy vegetation and/or brush. Areas like roadsides, orchards, fields, woods, roads and trails. Perfect for clearing and maintaining the more rugged landscape areas that include heavy grasses, debris, sticks, vines, branches and other wooded materials.

Hydraulic side shift allow the “D” flail mulcher to cut close to boundaries, around obstructions and trees as well as along roadsides.

“D” flail mulchers are fitted with a strong steel 80 HP gearbox with internal over-running clutch to prevent damage to your tractor or the mower.

Farmer-Helper “D” series flail mulchers are designed for dual duty. Be it cutting the field or clear the brambles this mulcher flail can handle the task. With a standard flail mower the material you are cutting is retained under the deck until it is expelled down on the ground. If you are dealing with brush and brances sometimes the material comes out from under the deck before it is fully mulched. With the “D’s” brush rakes you can keep the material in the mulching chamber longer.

Feature:

Minimum cutting height is controlled by adjustable 5 1/2″ rear roller., with wiper bar to remove mud and debris as you mow.

Uses high strength forged steel mulching 43 ounce blades with 16″ diameter swing can chop material up to 5″ in diameter.

Structural Q235 roll formed robot cut and fitted steel for durability and quality.

43 ounce 5 1/2″ wide forged tool steel hammer blades cut/chop up to 5″ diameter weeds & brush.

16″ blade swing provides fast blade tip cutting speed for faster mowing. 150 feet per second.

6″ balanced blade holder tube for smooth operation and long bearing life.

Balanced steel V-Belt pulley to eliminate vibration.

Dual Cat-I/II quick hitch comparable 5/16 inch steel tube 3-point hitch both fixed and slip top pin.

Offset from center to get mower past your tractor with hydraulic adjustment for mowing near and/or around objects.

Multiple tuff V-belts provide positive drive to the blades and external belt tighten make maintenance quick and easy.

Replaceable side skids assist with anti-scalping and reduce surface gouging.

Bearings are easily accessed for greasing and zerts are shielded from damage.

Full width rear roller with minimum cutting height adjustment from 1/2″ to 4″.

Roller has tapered ends to eliminate gouging when turning corners. Roller has a scraper bar to remove buildup mud and debris as you mow.

Powder coat finish keeps your mower looking good for years as it is more rust resistant and durable than spray finish.

Adjustable/Removable brush rakes keep branches in the mulching chamber longer.